A Brief Overview on How to Choose New York Water Booster Pumps

August 18th, 2022

When it comes to your water system, you want to make sure that adequate water pressure is achieved throughout the building. This is where you need to think about installing a New York Variable Booster Pump to meet your water pressure needs.

Low water pressure is a serious issue in New York buildings that are tall and have high water demand. The solution is installing a booster pump, but how do you choose the best-quality water pressure booster pump? Not to worry – this is your ultimate guide in which you are going to learn everything about water booster pumps. Let’s get started!
 

Know These Things Before Buying a Water Booster Pump

When you are buying the best booster pump, you need to take into account numerous factors for your specific home/office. Below are just a few things to look for when buying a water booster pump.

1. Pressure Boost
   This is probably the first thing to consider. Make sure your booster pump is able to boost your water pressure to a satisfactory level. The average PSI should be in the range of 20-50 PSI above your existing water pressure. If it is in the very low range of 15-25 PSI, you will need to get a booster pump that provides at least 40 PSI to your existing water pressure.

    

2. Dedicated Circuit
   Some water booster pumps require dedicated circuits. This means you will need advanced electrical work at the panel box. A booster pump should be plugged into a 120 Volt outlet and will give you the length of the power cord.

    

3. Pressure Regulator
   There are some water pressure booster pumps that need a separate pressure regulator, so that users can adjust the water pressure. Though most homes already have a water pressure reducing valve, determine whether you need to install one.

    

4. Material Quality
   It goes without saying that the best water pressure booster pump is built from durable materials, such as stainless steel. So, choose something high-quality that’s highly resistant to rust and corrosion.

    

5. Additional Accessories
   Booster pumps often have built-in pressure relief valves, check valves, and other accessories. Know what your booster pump comes with and what extra accessories you will need.

    

   The Process of Water Booster Pump Installation

   First, reading the manufacturer’s instruction manual is a must when you are planning on doing the installation. This is because different water pumps have different installation requirements. For instance, some water booster pumps require pressure relief valves. Here are a few important things to keep in mind when installing your water booster pump.

    

   1. Determine where to install the water booster pump, which should be closer to the main source.
   2. Make sure the location is near the main water shutoff and pressure regulator.
   3. It’s highly recommended to shut off the main water and drain the pipes.
   4. If your home doesn’t have a pressure regulator, then you may need one prior to installation.
   5. Consider optional accessories like a water pressure gauge, pressure regulator, and a bypass loop prior to the water pump.
   6. Measure the location of the pump and cut the pipe.
   7. Install the booster pump and then plug it in.
       

      How to Adjust the Water Pressure on Your Booster Pump?

      Generally speaking, there are two main ways to adjust the water pressure on your water booster pump. First way: You can use a built-in pressure regulator to adjust it at the pump. It looks like a screw or valve that requires a small turn to set the pressure.

      Second way: You can also adjust the pressure at the pressure-reducing valve of your building. There is a nut on the valve. Just turn it counter-clockwise to reduce the water pressure as per your needs.

       

      What’s the Best Water Booster Pump to Buy in New York?

      When additional water pressure is required, there is no better option than New York Water Booster Pumps. These pumps are fitted with quality pressure tanks, pressure switches, and thermal overload protectors. Plus, they use the powerful Yukawa IQ Pump 1000 on every system you purchase.

      New York Variable Booster Pumps are available in single-stage, which means they are attached to a main water supply pipe from which they can draw water into your water system. These pumps are also available in multiple-stage, which means they use centrifugal force to pull the water up into the system. Multiple-stage pumps are great to use in connection with underground water supplies for irrigation applications.

      Callaghan Pump offers high-quality New York Variable Booster Pumps that will be certain to bolster the water pressure. These pumps are carefully designed and assembled to boost water pressure within your water system for a variety of applications, ranging from domestic to industrial.

       

      In Closing

      Put your trust in New York Variable Booster Pumps that are available in varying scales, sizes, and types. They are being used in municipalities, pump stations, hotels, and industries to increase water levels for reservoirs, water towers, and tall buildings. We look forward to making an impact in your community by ensuring everyone enjoys a healthy amount of water pressure 24/7. Have any questions about our New York Variable Booster Pump?

      Reach out to us today.