Aurora Fire Pump NYC: The Backbone of Your Fire Protection System

October 11th, 2021

With the ongoing progress and development of cities and industries, the use of fire-fighting systems has been continuously increasing. On one hand, there are commercial places like hotels, hospitals, supermarkets, metro stations, schools, and warehouses. On the other hand, we have industries like petrochemical power plants, electronic industries, seaports, etc. They all need functional fire sprinklers for their fire-fighting endeavours, and no fire protection system is complete without a fire pump.

If you’re constructing a new building or renovating an old one, make sure to manage its fire system needs by installing a high-quality fire pump. The need for a fire pump should be decided as early as possible, generally before the completion of the project. So don’t wait until a fire emergency knocks on your door!

Let’s outline a process to determine whether or not you need an Aurora Fire Pump NYC. Also, let’s find out how to select the right fire pump to meet your required pressure and flow needs.

Determining the Need for a Fire Pump

A fire pump ensures each sprinkler head has adequate water to extinguish a fire. When high temperatures activate a sprinkler head, it releases water onto the fire and effectively decreases the blaze. To maintain adequate water pressure and supply, your sprinkler system needs a fire pump, especially when the flow rate is below a certain threshold. This is a common issue in high-rises, large buildings, and structures that have ground-level water tanks.

A fire pump will automatically bring the pressure back up and help the sprinkler system fight the fire. There’s also a jockey pump used to maintain water pressure in the fire protection piping system. It is connected to the fire sprinkler system in parallel with the fire pump and helps it to sense an appreciable pressure drop. This is what makes the jockey pump an essential part of the fire pump’s control system.

So if your building has inadequate water flow and pressure to meet the demands of your fire suppression system, then it’s important to install one of the Aurora Fire Pumps NYC. These pumps can be used to lift water from a variety of sources, such as public water mains and elevated tanks. Each source requires a slightly different approach, so it is most helpful to have proper hydraulic-calculation estimates for the flow and pressure requirement.

Selecting the Right Fire Pump for Your Building

To calculate the water pressure required to meet the fire protection demands, first, consider the water pressure required at the most remote sprinkler. Now add different pressure losses back to the supply. We recommend you consider a value greater than 7PSI. Also, elevation is an important factor when it comes to choosing a fire pump for your building.

Install a fire pump in a place where flow demand is between 100% and 150% of rated flow. The most preferred value would be somewhere between 115% and 135%. In addition to that, select the right type of fire pump from horizontal split-case fire pumps, inline fire pumps, and vertical turbine fire pumps.

Sizing of the Aurora Fire Pump NYC

The size of a fire pump depends on the square footage and fire hazards of a building. To ensure a good match for your fire protection needs, choose a sizing method that is ideal for your building. Calculate the area of the fire pump and the sprinkler system. You can calculate the fire pump size required for your building with two different methods. The first one is the standpipe method, which is ideal for smaller buildings and requires only a few standpipes. The sprinkler area calculation is the second method. This method is much more complex than the first, but it is ideal for larger buildings.

Installing a Fire Pump in Your Building

The installation of a fire pump, along with its controller, jockey pump, and accessories, needs proper space. The room should have a clear path of entry and exit. All piping must be straight, clean, and properly secured. Everything from the jockey pump piping to the sensing lines should be installed in a proper way. Don’t cram them into a corner of the room. This will make performing repairs down the road simple and straightforward.
To learn more, get in touch with the master distributor of NYC variable booster pumps. Our experts will help you determine your fire pump needs. We will also help you decide on the type and size of the fire pump in New York. Callaghan Pump offers fire protection pumping solutions for a number of industrial, commercial, and residential uses.

Have any requirements related to Aurora Fire Pumps NYC? Don’t hesitate to reach out to us.