CT Variable Booster Pumps: Solving Low Pressure in Industries

May 24th, 2022

If an industrial building utilizes water on a daily basis, then it becomes quintessential to ensure adequate water pressure. This is because a water pressure drop within an industrial pipe can lead to serious problems that may affect productivity. So what should you do if the water pressure in an industrial building just isn’t what it used to be? First, diagnose the issue and the root cause.

Some of the most common causes of pressure drop in industries are:

1. Internal Friction

   Friction is a chief cause of water pressure drop and occurs within the wall of the pipe. If the fluid is moving within the pipe, the irregular surface of the pipe may hinder the fluid flow. The solution is to use a brand-new pipe with its interior coated. However, over time, it may also become abrasive and scratch the internal coating.

2. Sharp turns

   A fluid travels faster within a straight line. On the other hand, sharp turns offer resistance to the fluid due to an abrupt change in the flow direction. This kind of pressure drop is known as pressure loss at bends and depends on the bending angle.

3. Pipe Length

   The longer the pipe, the greater friction it offers. Thus, pressure drop has a positive correlation with the length of the pipe. When the length is varying between two identical pipes, the water pressure drop will be greater in the longer one.

4. Scaling

   Industrial pipes carrying mineral-rich fluids develop scaling. This is the mineral build-up that may obstruct the fluid flow and result in low water pressure.

5. Gravity

   With increasing pipe elevation, water pressure reduces. To overcome this particular issue, you will need a CT Variable Booster Pump. A booster pump is recommended to boost water pressure to the desired level. It is also useful in applications where a single pump can’t deliver the desired water pressure.

   At Callaghan Pump…

   We understand that choosing the right Connecticut Variable Booster Pump is a little tricky. You need to consider several factors, ranging from the state of your industrial pipelines to the desired level of pressure head. As one of the largest pump distributors in Connecticut, our expert team of engineers can help you make the right decision.

   Feel free to reach out to us.