Explained: The Crucial Role of NYC Fire Pumps in Fire Protection

December 16th, 2021

Did you know that you have as little as two minutes to escape a building when a fire starts? Yes, you read it right, only two minutes. Luckily, there are fire protection systems set in place to save lives and save premises from turning into ashes. These systems are commonly used in commercial and residential buildings that require fire safety features like fire sprinkler equipment, fire alarms, and fire extinguishers. Here’s everything you need to know about fire protection.

The Need to have a Fire Protection System

Installing a fire protection system is a life-saving asset and investment. You can’t overemphasize its role when there’s a fire. Just think of a company and the investments it makes in manufacturing equipment, hardware, and infrastructure. What if a fire starts and costs the company millions of dollars? The business would suffer immensely and lose its valuable contracts. In a nutshell, you must take into consideration the importance of a fire protection system. To give you an in-depth look, here are some numbers you should be aware of:

• Nearly 100,000 commercial and business buildings face fire incidents every year, costing over 2.4 billion dollars.
• Each year, around 95 deaths and 1,200 injuries occur due to business fires.
• 31% of office fires occur between 7PM and 7AM, resulting in 67% of damage.

You see, the necessity to install a fire protection system is more important than ever. And when we speak about manufacturing facilities, you can’t skip fire protection. Moreover, it’s almost impossible to set up a business without having a fire system. However, keep in mind that a fire protection system works only when there is adequate water pressure.

The Importance of Water Pressure in Fire Protection

When you live in a building consisting of several floors, it’s hard to supply adequate water pressure to top floors. This is a common issue in high-rise buildings, hotels, and warehouses. Since the water has to act against gravity, you need something powerful to boost water pressure and meet your fire protection needs. This is where your building needs an NYC Fire Pump to provide sufficient water pressure to meet the hydraulic requirements of the fire protection system. These pumps are also important if the water supply is provided from a ground-level water tank.

The Use of a New York City Fire Pump

Providing high-pressure water to the fire sprinkler system is the key role of NYC Fire Pumps. In addition to that, these pumps are specially designed to increase the flow rate of the water with the help of a motor, driver, and controller. Such pumps receive water from an underground water tank, lake, or reservoir, and are usually powered by electricity or diesel.

All in all, NY Fire Pumps are an essential component of a fire protection system, especially in buildings above 400 ft. Such pumps are critical in distributing ideal water pressure through sprinkler systems when the standard water supply isn’t enough for fire-fighting.

Wrapping Up

NYC Fire Pumps are the best option for higher flow applications and can be easily installed in tight places. On top of that, these pumps require fewer repairs or less maintenance, making them economical in the long run. The most widely used fire pump is the horizontal split case. Although vertical split case fire pumps are also pretty similar to the horizontal split case, they require less space as they are vertically designed. Also, these pumps are useful where the water source is located below ground, such as underground tanks, storage wells, etc.

To decide on which type of pump is appropriate for your given facility, feel free to discuss your requirement with a fire safety professional at Callaghan Pump today.